JollyIm's vore LoRAs (stable diffusion)

Are you looking for a place to post your work, hoping to receive comments, suggestions and criticisms? If so, this forum is for you! Showcase your stories, drawings, animations, and anything else you have created here. You can even upload your files directly to our site! Note: Everyone is free to share opinions of anything here. If you can't handle criticism, refrain from posting here!
Forum rules
This section is for any artist, writer, animator, or any form of creation to share their work in order to receive comment to improve themselves better.

Read the rules in detail here

Read the Critiquing suggestion here

Please open only one thread per person. Detail here.

Re: JollyIm's vore LoRAs (stable diffusion)

Postby dysondyson551 » Mon May 01, 2023 9:25 am

Thanks for your quick answer :) I'm looking forward to hear from you again.
dysondyson551
New to the forum
 
Posts: 2
Joined: Thu Apr 27, 2023 5:20 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby JollyIm » Wed May 03, 2023 11:28 am

The scat lora is now online again, the link takes now you to the new huggingface page.
Scat content is now banned on Civitai so I cannot reupload it there.
User avatar
JollyIm
Been posting for a bit
 
Posts: 41
Joined: Tue Mar 21, 2023 6:53 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby ryanshowseason3 » Wed May 03, 2023 12:38 pm

Thanks for these by the way. I used them in my rhythm tapping game for the game jam. Credited of course.
User avatar
ryanshowseason3
???
 
Posts: 2484
Joined: Thu Jan 05, 2006 12:00 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby darksidedora » Fri May 05, 2023 12:24 am

The Defecation lora works fairly well in a photorealisic setting too.

This output was generated with the following:
txt2img a crying slavegirl with shaved head kneeling submerged in a steel vat full of golden liquid with a turd floating in it, barcode tattoo, used condoms around her, a stream of yellow water falling from above, scared, (((nipple_clamps))),(((womanbuzzcut))), ((scat)),(huge breast implants), latex corset, tied tits,<lora:defecation_v1:0.6> <lora:latex_huger_c7-1+76-1+64-4:0.7> <lora:womanbuzzcut:0.9> <lora:NippleClamps:0.7> <lora:tiedropev1:0.6> <lora:usedcondom:0.5>
Negative prompt: child, childlike, EasyNegative, bad-hands-5, (worst quality, low quality:1.4), low contrast, text, watermark, cropped, head out of frame, male, penis, cock, smiling, happy, angry, ((((hair))))
Steps: 150,
Sampler: DPM++ SDE Karras,
CFG scale: 10,
Seed: 2632995461,
Face restoration: CodeFormer,
Size: 600x800,
Model hash: 8a02392904,
Model: clarity_2


processing | 775.5/33.1s
Time taken: 1m 2.77sTorch active/reserved: 6191/6304 MiB, Sys VRAM: 8606/12288 MiB (70.04%)
Attachments
00160-269980077.png
darksidedora
New to the forum
 
Posts: 1
Joined: Fri May 05, 2023 12:16 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby SmoothAsButter23 » Sat May 06, 2023 4:23 pm

these are really cool! someone has to use these in a game or something
User avatar
SmoothAsButter23
Somewhat familiar
 
Posts: 118
Joined: Sun Jan 19, 2020 3:51 pm

Re: JollyIm's vore LoRAs (stable diffusion)

Postby Ninja739 » Sat May 06, 2023 6:11 pm

The Big mouth, and also the Stomach interior lora need the Lycoris extension to work.
It can be found here - https://github.com/KohakuBlueleaf/a1111 ... ui-lycoris
Once installed you place the loras inside "models\LyCORIS"
User avatar
Ninja739
New to the forum
 
Posts: 6
Joined: Thu Aug 22, 2013 8:46 pm

Re: JollyIm's vore LoRAs (stable diffusion)

Postby Kirah » Tue May 23, 2023 12:09 pm

Sorry to bump this, but OP, are you perhaps the guy that made a LoRa for in-progress swallowing vore? It seemed to use very similar source images for the dataset that you used, so I figured it might be you.

It was very briefly posted on Civitai, but it seems to have been taken down by Civitai and I can't find it anymore. Can't find anyone who has it and is willing to reupload it either.
User avatar
Kirah
Intermediate Vorarephile
 
Posts: 497
Joined: Wed Jan 26, 2011 11:44 am
Location: The Netherlands

Re: JollyIm's vore LoRAs (stable diffusion)

Postby ryanshowseason3 » Tue May 23, 2023 2:38 pm

SmoothAsButter23 wrote:these are really cool! someone has to use these in a game or something


Way ahead of you.

viewtopic.php?f=79&t=65169
User avatar
ryanshowseason3
???
 
Posts: 2484
Joined: Thu Jan 05, 2006 12:00 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby JollyIm » Thu May 25, 2023 11:38 am

Kirah wrote:Sorry to bump this, but OP, are you perhaps the guy that made a LoRa for in-progress swallowing vore? It seemed to use very similar source images for the dataset that you used, so I figured it might be you.

It was very briefly posted on Civitai, but it seems to have been taken down by Civitai and I can't find it anymore. Can't find anyone who has it and is willing to reupload it either.


You're halfway right :lol: I actually helped him doing it. The original dataset was made by me, but after me giving up on it, he continued improving it, and with also contributions from others he made the model work much better how I thought it's possible. Unfortunately, in order to make it work, a lot of pics from a single artist were added, making it too similar to the original style (btw in my loras I never used them so it's odd you find similarities). The model was removed due to the creator's own will, so I will not post it or share it anywhere.
User avatar
JollyIm
Been posting for a bit
 
Posts: 41
Joined: Tue Mar 21, 2023 6:53 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby sikomode » Sun Jul 02, 2023 2:46 pm

Hello there, can you make at least a little guide how to make decent images? I downloaded all required things, but can't do anything specific..
sikomode
New to the forum
 
Posts: 1
Joined: Sun Jul 02, 2023 2:42 pm

Re: JollyIm's vore LoRAs (stable diffusion)

Postby SmoothAsButter23 » Sun Jul 09, 2023 5:34 pm

sikomode wrote:Hello there, can you make at least a little guide how to make decent images? I downloaded all required things, but can't do anything specific..

I would also like to know this, if someone could explain or link some guides i would greatly appreciate it
User avatar
SmoothAsButter23
Somewhat familiar
 
Posts: 118
Joined: Sun Jan 19, 2020 3:51 pm

Re: JollyIm's vore LoRAs (stable diffusion)

Postby JollyIm » Tue Jul 11, 2023 11:58 am

I plan to create a post were I plan to explain all my processes for creating characters. I like to create all sort of pics for each character, usually I do that for Unbridled Hedonism, but you can do pics in those way for basically any game, novel, roleplay, etc. So I'll also release my characters there.

As for the guides, if you need something basic you may find something like this interestig:https://civitai.com/models/70977/beginner-guide-document
The best tip I can give is to copy prompts from pics you like. If you drag and drop the pics into the PNG info tab you can read all the details. Just remember many words you read in the prompts are actually models you need to download, but I'll write about it in detail into my post.
User avatar
JollyIm
Been posting for a bit
 
Posts: 41
Joined: Tue Mar 21, 2023 6:53 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby JollyIm » Mon Jul 17, 2023 12:14 pm

Hello there, can you make at least a little guide how to make decent images? I downloaded all required things, but can't do anything specific..

I would also like to know this, if someone could explain or link some guides i would greatly appreciate it


Here, together with my new characters pics, I also posted my in-dept guide to obtain pics that look exactly as mine:
https://aryion.com/forum/viewtopic.php?f=79&t=65515

Direct link to where the guide is located:
https://drive.google.com/drive/folders/1oc07xzzNQJTPmxkKfYTroA8udNdUwXC9
User avatar
JollyIm
Been posting for a bit
 
Posts: 41
Joined: Tue Mar 21, 2023 6:53 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby GrayMech » Tue Sep 05, 2023 12:23 pm

Which main model would you recommend using in conjunction with the mouth, stomach bulge and stomach interior models? Using the default model doesn't yield great results in my experience so far
GrayMech
New to the forum
 
Posts: 2
Joined: Wed Jan 06, 2021 8:38 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby JollyIm » Tue Sep 05, 2023 3:15 pm

GrayMech wrote:Which main model would you recommend using in conjunction with the mouth, stomach bulge and stomach interior models? Using the default model doesn't yield great results in my experience so far

Take a look at the guide in the previous post, there's everything I usually use for those. A lot of base models work fine, and almost every single anime-like model. I usually use my merge, Jollymix.
User avatar
JollyIm
Been posting for a bit
 
Posts: 41
Joined: Tue Mar 21, 2023 6:53 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby anonymous455455guest » Mon Nov 27, 2023 2:23 am

https://rule34.xxx/index.php?page=post& ... id=7900341

Was this done with inpainting or is there a model to show swallowing like this? Would you mind sharing the prompt used if it's not inpainting?
anonymous455455guest
New to the forum
 
Posts: 1
Joined: Mon Nov 27, 2023 2:15 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby JollyIm » Thu Nov 30, 2023 12:13 pm

anonymous455455guest wrote:https://rule34.xxx/index.php?page=post&s=view&id=7900341

Was this done with inpainting or is there a model to show swallowing like this? Would you mind sharing the prompt used if it's not inpainting?


It's a model but unfortunately it's not available online anymore. I wanted to incorporate it in my processes for characters creation but it doesn't go well with characters lora so I never did.
User avatar
JollyIm
Been posting for a bit
 
Posts: 41
Joined: Tue Mar 21, 2023 6:53 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby botfather » Sun Dec 10, 2023 1:11 pm

A few of the good ones I managed to get using these :)
ComfyUI_00266_.png
ComfyUI_00294_.png
ComfyUI_00035_.png
botfather
New to the forum
 
Posts: 1
Joined: Sun Dec 10, 2023 1:01 pm

Re: JollyIm's vore LoRAs (stable diffusion)

Postby JollyIm » Tue Mar 26, 2024 1:23 pm

I edited the post by adding the new vore belly lora: xlhttps://civitai.com/models/365009/vore-belly-pony
00084-1140683839.png
User avatar
JollyIm
Been posting for a bit
 
Posts: 41
Joined: Tue Mar 21, 2023 6:53 am

Re: JollyIm's vore LoRAs (stable diffusion)

Postby Kirkurr125 » Sun Apr 07, 2024 3:50 am

is there a unbirth model ?
Kirkurr125
New to the forum
 
Posts: 3
Joined: Fri Jun 24, 2022 6:08 am

Previous

Return to Work to be shared!